Practical for retrofitting to inflatable sup boardsTo stick on sup- board pad approx. 8 cm in sizeCan be used as luggage net eyelets or as leash eyelets (no towing eyelet)Large adhesive surfaceWhite or blackSupplied without adhesive
With international SAE 5-hole flange. For 12V and 24V systems. Protection class IP65. Made of stainless steel.The signal transmitted by the encoder allows you to read from the instrument the type of use of the tank (e.g. dirty/grey/clear water - fuel) and, if you specify this when ordering, also the volume in litres and not in percentages. If several tanks are used on board for the same liquid, you must indicate the numbering of the tanks (e.g. 1 - 2- 3) when ordering.
Coarse abrasive paste for polishing, suitable for use after sandpaper with grit P1000.Combines a high abrasive and polishing effect. Suitable for oxidised and yellowed gelcoats.
Active, hydrophilic antifouling based on copper and carbon, increases glide.For sail and motor boats up to 35 m in length.For authorised professional users only. Regulation (EU) 2020/1182.
Two-component polyurethane varnish, UV-resistant. Can be applied directly on top of GELCOAT or epoxy-polyurethane primers. Not suitable for permanently immersed parts.
Made of wood with polyurethane varnish, reinforced edges, premium bristles, angled connection for grating, made of aluminium. Available in two different sizes.
Very practical and robust, with hand-friendly rubber grip, non-slip even with wet hands. Snap connection at the end, water passage. Medium-hard brush suitable for all surfaces.
Brush with light-coloured bristles, the wooden handle made of waste wood is much more durable than wooden handles, resistant to moisture and solvents. The metal ring and the epoxy glue make the brush suitable for paints and varnishes, water or solvent based. 100% Made in Italy.
Ideal for cleaning the hull diffuser, propellers, teak ceilings, hard-to-reach corners, canopies, canopy fixings, stainless steel side rails and places where rust precipitates, etc.
VC Tar2 ist eine 2-Komponenten Epoxydgrundierung, die sich als Osmoseschutz auf GFK oder Korrosionsschutz auf Stahl und Leichtmetaller eignet.Nur für den Unterwasserbereich.Gute Verlaufseigenschaften ergeben ein exzellentes FinishEinfach zu verarbeiten - überstreichbar innerhalb von StundenKein Anschliff zwischen den Anstrichen erforderlichErzeugt eine exzellente wasserdampfdichte Sperrschicht zum Schutz vor OsmoseIdeale Basis für alle VC-Antifoulings
Medium-strong abrasive paste for polishing, suitable for use after sandpaper with grit size P1500.Removes scratches and traces of oxidation and provides an especially clean and shiny surface.Suitable for soft or coloured gelcoats and lacquers.