Active, hydrophilic antifouling based on copper and carbon, increases glide.For sail and motor boats up to 35 m in length.For authorised professional users only. Regulation (EU) 2020/1182.
Two-component polyurethane varnish, UV-resistant. Can be applied directly on top of GELCOAT or epoxy-polyurethane primers. Not suitable for permanently immersed parts.
Brush with light-coloured bristles, the wooden handle made of waste wood is much more durable than wooden handles, resistant to moisture and solvents. The metal ring and the epoxy glue make the brush suitable for paints and varnishes, water or solvent based. 100% Made in Italy.
VC Tar2 ist eine 2-Komponenten Epoxydgrundierung, die sich als Osmoseschutz auf GFK oder Korrosionsschutz auf Stahl und Leichtmetaller eignet.Nur für den Unterwasserbereich.Gute Verlaufseigenschaften ergeben ein exzellentes FinishEinfach zu verarbeiten - überstreichbar innerhalb von StundenKein Anschliff zwischen den Anstrichen erforderlichErzeugt eine exzellente wasserdampfdichte Sperrschicht zum Schutz vor OsmoseIdeale Basis für alle VC-Antifoulings
Osmosis-preventing insulating coating for fibreglass boats. Also suitable as a waterproof insulating coating for metal parts (bead keels, rudders, ...).
Hard antifouling with organic biocide without copper oxide. Suitable for any hull (GRP, aluminium, wood, etc.) Yield white 9 m< sup>2/l Colours 7m< sup>2/l. Recommended for moderately aggressive areas.Min. application temperature 10°C. Second coat at 20°C after 6 hours. Drying time before leaving to water at 20°C, after 12 hours.For authorised professional users only. Regulation (EU) 2020/1182.
Prevents pox and fouling on shaft, propeller, sterndrive, transducer, inlets, and underwater hull, with corrosion protection. Universal, biodegradable.
Carbolic oil clear varnish for wood, with UV filters for highest quality. Combines highest elasticity and durability with remarkable and long-lasting gloss. VG 66 premium provides lasting protection for boats and wood exposed to weather, sun and temperature fluctuations. On new or renewed wood, apply two coats of VG 66 premium diluted 1/1 with turpentine. Then apply 5/6 coats of the undiluted product at least 24 hours apart. Before the last coat, we recommend lightly sanding the surface. Do not apply on damp wood or in the rain.